High-pressure valve
With valves, a distinction is made between high-pressure and low-pressure versions. In most households you will find high-pressure fittings that are connected to a direct hot water pipe. The water is heated centrally or with the help of a water heater. If you have already connected an old fitting, check whether two hoses from the fitting are connected outgoing into the two angle valves in the wall. In this case, please order a high-pressure or classic fitting variant.
Auralum Eco
With Auralum Eco up to 30% less water flows through your faucet and at 100% power. Every time you turn on the water, you benefit from a full jet while saving money.
Easy to install
The installation of all our products is optimized to the point that anyone should be able to install them if not mentioned otherwise.
Specification:
Type of fitting: fittings for basins
Extras: extendable
Installation type: basin
Number of holes: One hole
Number of handles: One handle
Cold and hot knobs: YES
Valve Type: 35MM Ceramic Valve
Installation size: see picture
Power temperature: 0-90 degrees
Applicable thickness of the mounting plate: 1-25mm
Applicable mounting hole: 32mm-35mm
Recommended water pressure: 0.5-5 bar
Armature center: single hole
Material: zinc alloy
Installation package: YES
Care instructions:
- The tap must be cleaned on time. If it is not cleaned for a long time, the surface will easily become dirty.
- Clean with a soft, damp cloth (water and mild detergent or soap solution).
- Wipe with a dry cloth. (Do not use scouring agents, steel wool or detergents containing lime sols, acids, alcohol or abrasives)
Share your thoughts with other customers